How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add a second ignition key. It requires dealer assistance using the handheld computer known as Tech-2. A new key and transponder are required to be purchased and then programmed into the car.
Rotate your keys to stop one from wearing out quicker than another. This will help keep your keys in good condition.
Replacement Case
As opposed to the traditional Saab keys of old keys, the new key fobs are equipped with electronics which makes it more difficult to copy. This has made stealing cars a lot more difficult than it was twenty years ago. But, it has also made the replacement of lost keys an incredibly expensive endeavor.
Every owner of a Saab 9-3 needs to have at least two functioning keys. It is expensive to replace a lost key because it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers usually charge between $100 and $200 to do this.
There are ways to avoid the high cost. Some parts providers will look up the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a brand new metal key blade at just a fraction of dealer cost. The key, however, must be identical to the original to work correctly within your car.
Follow these steps to replace the case. You'll require a flathead and a lot of patience. With the screwdriver, slowly tear the plastic away and separate the emergency key from the case. Once the case is open, remove the electronic components and place them inside the new case. Make sure you put the correct badge and key back into the case as well.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This YouTube DIY video Cyclone Cyd will show you how to replace the battery for the remote key fob in just four steps. This tutorial should work with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that will release the backup key inside the fob. This is usually located near the Saab logo on the back of the fob. Next use the flathead screwdriver to insert into the small hole in this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.
Once you have installed the new batteries CR1632, you can rebuild the remote key fob. Then, you can program it into your car. The entire process shouldn't be more than an hour. It's a very easy procedure that doesn't require any special tools.
If you lose a key the process is a bit more involved however it can be done. The dealer will have to read the car's VIN and then request a replacement key blade and TWICE module with the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is a device that locks and unlocks your car, it's got batteries inside. Batteries are able to last for a short time and eventually will die. This is a typical issue that affects all cars, and the good news is that you can replace the batteries in a majority of key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that include all the electronics already installed, which means you can simply open the case and replace the batteries that were in the case. It is important to keep in mind that you will need to take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it will split open, making it easier to remove.
If you're about to replace the keys make sure you have spare keys, because this can cut down your total cost by a substantial amount. If you do have a spare, you can request that the dealer cut a new key and program it to the car, which is cheaper than replacing the whole key fob.
It is possible to add another key to your car if you don't already have one, but it requires an extensive amount of research and effort. It costs a few hundred bucks to add an additional car key. The computer of the car also needs to be programmed. Professionals can accomplish this however, it's a costly option.
saab key programming -3 is a more sophisticated alarm system built on a keycode. This means that when you lose your sole working key, adding another key can be extremely expensive as the car has to have a computer module installed and it must also be programmed to accept a new key. Even dealers can charge hundreds of dollars to program an entirely new key, in the event that they are unable to complete the task.
Dealers will charge you a high price to replace your car computer (also known as the CIM or SAAB twice) if you lose the only working key. We can reprogram the current EEPROM inside your car's computer so that it is ready for an additional key. This will save you more than 50% off the cost you spend at an auto dealer.
If you've owned a 9-3 from SAAB for quite a while you are aware that the ignition keys are not very durable. If the ignition key you have isn't working properly, you should look into replacing it. They can become extremely sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.